76
Output 2
General
Types Available: Relay, SSR and DC
Relay
Contact Type: Single pole double throw (SPDT)
Rating: 2A resistive at 120/240V AC
Lifetime: > 500,000 operations at rated voltage/current
Isolation: Inherent
SSR Driver/TTL
Drive Capability: SSRD>4.3V DC into 250 ohm minimum
Isolation: Not isolated from input or other SSR outputs
DC
Resolution: Eight bits in 250 mS (10 bits in 1 second typical, >10 bits in
>1 second typical)
Update Rate: Every control algorithm execution
Ranges: 0-20 mA, 4-20 mA, 0-10 V, and 0-5 V
NOTE: Changes between V and mA ranges also require jumper movement.
Load Impedance: 0 - 20 mA: 500 ohm maximum
4 - 20 mA: 500 ohm maximum
0 - 10 V: 500 ohm minimum
0 - 5 V: 500 ohm minimum
Isolation: Isolated from all other inputs and outputs
Transmitter Power Supply Rating: 24 VDC, 20 mA maximum
Output 3
General
Types Available: Relay, SSR Driver and DC linear (retransmit only)
Relay
Contact Type: Single Pole Double Throw (SPDT)
Rating: 2 A resistive at 120/240V AC
Lifetime: > 500,000 operations at rated voltage/current
Isolation: Inherent
SSR Driver/TTL
Drive Capability: SSRD>4.3 V DC into 250 K ohm minimum
Isolation: Not isolated from input or other SSR outputs
To Next Page
Loading...