Det-Tronics X3301 - EN54 Approvals

37
95-8704
2.7
aPPENDIX E
EN54 APPROVALS
Certication Bodies
Conventional Output LON Output
Certicate/Approval
Number
Basis of Approval
Certicate/Approval
Number
Basis of Approval
VdS –
Construction Products Regulation
0786 – CPR – 20453 EN 54-10 + A1 — —
VdS*
G 202136
VdS 2344
VdS 2504
EN 54-10 + A1
G 212019
VdS 2344
VdS 2504
EN 54-10 + A1
EN 54-17
S 212002
VdS 2344
EN 54-13
S 212002
VdS 2344
EN 54-13
BRE –
Construction Products Regulation
— — 0832 – CPR – F0892
EN 54-10 + A1
EN 54-17
LPCB 973e/03 EN 54-10 + A1 973a/03
EN 54-10 + A1
EN 54-17
* Approval of all sensitivities.
INSTRUCTIONS FOR THE APPLICATION OF THE APPROVAL COMPONENT/SYSTEM
The installation shall take into account, that the orientation arrow on the flame detector is directed
upwards, as the view angle in this direction is <90°.
The IR-flame detector configured to all sensitivity levels corresponds to class 1.
The following accessories are EN54-10, EN54-13, and EN54-17 approved for use with the X3301 Flame Detector:
Part Number Description
102740-002 Magnet
007739-001 Magnet and Extension Pole
007290-001 Q9033B Stainless Steel Mounting Arm Assembly is for aluminum and stainless steel detectors
007290-002 Q9033A Aluminum Mounting Arm Assembly is for aluminum detectors only
011385-001 Q9033 Collar Attachment