Humidity Setpoint
Humidity setpoint is the percent humidity that the heating
system and humidifier will attempt to maintain in heating
mode.
Default for Humidity Setpoint is 45%. Adjust the
humidification setpoint to a value from 20% to 50%.
De-Hum Setpoint
The Dehumidification setpoint is the percent of humidity
that the cooling system will try to reach. Dehumidification
is accomplished through control of the compressor and
speed of the circulator blower.
Default for De-Hum Setpoint is 60%. Adjust the
dehumidification setpoint to a value from 40% to 95%.
17
To Next Page
Loading...
