Go to Pumping with
Press and pump the coil on the ground several times until
you obtain the display G.B OK
Exit with
G.B.
TRACKING
PUMPING
BEACH
MANUAL
START
Go to Manual with
Adjust with
Exit with
G.B.
MANUAL
BEACH
TRACKING
PUMPING
START
SOL
MANUAL
BEA
TRACKING
IN PROGRESS
G.B OK
Press Ground
4 modes are available:
MANUAL - PUMPING - TRACKING - BEACH (ON / OFF)
G.B.
17
You can manually adjust the ground rejection levels from 60 to 95 (Beach
O mode) or from 0 to 30 (Beach On mode)
90 is the default level, it is the most common level which enables you to
reject all magnetic minerals found in the ground.
By reducing this gure towards 87 you will begin detecting hot rocks,
and knocks to the coil may result in false signals. Even lower, between
75/85, pottery and the ground itself will begin interfering with your
device.
If you are inexperienced in working with ground eects, we
strongly suggest that you limit yourself to a Ground Balance level of 90,
which is the default setting, and is the most stable reference level
recommended for inland ground. Levels lower than 90 will result in
increasing instability.