Deus XP - Tracking Mode

18
15 cm
~
IN PROGRESS
G.B.
MANUAL
BEA
TRACKING
G.B FAIL
Pumping is a semi-automatic process which allows you to adjust the
ground balance in a zone that you have determined as being representa-
tive of the mean level of the ground being prospected.
Henceforth, the measured value of the ground is entered in memory and
used as the new active ground balance value.
If this value is unsuitable, or if it generates too much instability, you can
repeat the process in a dierent zone or switch to manual mode in order
to modify it by, for instance, adding several extra rejection points.
If a metal target is detected while you are pumping, Dēus will
recognise this and display the message
G.B FAIL
It will then retain the previous ground balance value.
This problem is generally caused by iron being omnipresent. If this is the
case then move to another location and restart the pumping mode.
In low- or non-mineralised ground, there is no need to adjust the
ground balance and you are advised to remain on 90 for greater stability.
MANUAL
PUMPING
SOL
BEACH
TRACKING
Go to Tracking with
Exit with
In this mode, Dēus repeatedly scans the ground and digitally lters the
extracted signals to determine the mean value on a continual basis.
This mode may be useful in soils with relatively uniform mineralisation,
and where the mineralisation varies gradually from zone to zone, which
is often the case in naturally mineralised ground. In this case, Dēus
automatically readjusts the ground balance according to the most
recent value measured.
However, in ground where mineralisation has resulted from human
presence (ancient settlements, for example) this mode may be unsuitable
due to the disparity in the ground events.