EasyManua.ls Logo

Deus XP - User Manual

Deus XP
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
USER'S MANUAL
Question and Answer IconNeed help?

Do you have a question about the Deus XP and is the answer not in the manual?

Summary

Technical Introduction

DEUS, the first fully wireless detector

Introduces the Dēus as the first fully wireless metal detector.

List of Parts

Assembly

Starting Up

To switch off Dēus

Explains the procedure for safely powering down the Dēus metal detector.

Factory Programs

Menu

Discrimination

Details how to adjust the discrimination level to reject unwanted targets based on conductivity.

Sensibility

Explains how to adjust the detector's sensitivity to signal reception and manage interference.

Frequency

Guides users on selecting detection frequencies to adapt to different ground and target conditions.

Iron Level

Describes how to control the volume of the low-pitched tone associated with iron targets.

Reactivity

Explains how to adjust reactivity for signal analysis speed and selectivity in various ground conditions.

Audio Curve

Details how to adjust the audio curve to amplify distant targets and improve alertness.

Notch

Explains the notch function for rejecting specific conductivity ranges of targets.

Ground

Manual Mode

Guides users on manually adjusting the ground rejection levels for optimal performance.

Pumping Mode

Explains the semi-automatic process of adjusting ground balance by pumping the coil.

Tracking Mode

Describes how the detector automatically adjusts ground balance based on continuous ground scanning.

Beach Mode

Details how to activate and adjust ground balance specifically for wet beach (salt water) conditions.

Static Mode

Calibrating the Threshold

Guides users on calibrating the static mode threshold for optimal sensitivity and stability.

Option

Programmes

Explains how to modify, save, or restore factory detection programs.

Coil

Details how to select and pair different detector coils with the remote control and headphones.

Configuration

Explains how to modify general technical settings for the remote control.

Wireless Headphones

Menu

Details how to access and adjust settings (Discrimination, Sensitivity, etc.) using the headphone menu.

Power Supply-Batteries

Low Battery Lights

Explains how to interpret battery charge level indicators on the remote control and headphones.

Battery Life

Provides information on the expected battery life of the coil, remote control, and headphones.

Charging Time

Details the time required to charge the coil, remote control, and headphones.

Charge

Instructs on how to connect and charge the different Dēus elements simultaneously.

Lithium Polymer (LIPO) Battery Durability

Explains the durability and expected lifespan of the LiPo batteries.

Replacing Batteries

Guides on how to replace batteries in the headphones and remote control.

Batteries

Lists safety precautions related to battery handling, charging, and disposal.

Blocs Secteur

Lists safety precautions for using the power adaptor and charger.

Expert

Multi Tones

Explains how to use multi-tone modes to categorize targets by conductivity and tone.

Pitch

Describes the pitch mode which varies audio signal based on target proximity and strength.

Multi Tones, Thresholds and Tones

Details how to customize sound partitioning and assign frequencies to discrimination ranges.

TX Power

Guides users on adjusting the strength of the emitted electromagnetic field.

Frequency Shift

Explains how to slightly shift the operating frequency to avoid interference.

Silencer

Details how to use the silencer to reduce crackling sounds caused by iron targets.

Multi Notch and Window TH

Explains the advanced notch function to widen the rejection window for specific targets.

Practical Information

Advice Before Beginning Detecting

Provides guidance on practicing with the detector and choosing a suitable site.

Optimise Your Searching

Offers tips on sweeping techniques, coil proximity, and target identification.

Locating a Target Using Crossed Sweeps in Dynamic Mode

Explains how to pinpoint targets using crossed sweeps in dynamic mode.

Precaution for Use

Troubleshooting

Abnormal performance, instability, false signals, misplaced interference

Addresses issues related to sensitivity, interference, coil position, and ground balance.

The coil does not switch on

Solves problems where the coil fails to power on while other components work.

No detection sound in headphones

Addresses issues where no sound is heard in headphones despite the device being on.

No sound when passing over a target

Troubleshoots situations with no audio feedback when passing over a target.

False signals when coil is knocked

Provides solutions for false signals triggered by knocking the coil.

Detector beeps on pottery and hot rocks

Offers solutions for false signals caused by pottery or hot rocks.

Specifications

Settings

Details the various settings available for the Dēus detector, including radio, discrimination, and ground balance.

General Features

Covers physical attributes like stem, batteries, weight, and operating conditions.

Accessories

Spare Parts

Recommendations to Detectorists; The Law

Factory Programs

Your Settings

Menu Structure

Declaration of Conformity CE

Safety relating to electromagnetic radio waves

Discusses the product's compliance with safety standards regarding electromagnetic waves.

Warranty

Quick Start

To switch off Dēus

Explains the procedure for safely powering down the Dēus metal detector.

Deus XP Specifications

General IconGeneral
WirelessYes
Ground BalanceAutomatic and manual
Search Coil9" or 11" Double D
WaterproofCoil waterproof
Battery LifeUp to 20 hours
Search Modes9 pre-configured programs, customizable
Target IDYes
DisplayLCD
Sensitivity AdjustmentYes
Weight2.2 lbs (1 kg)
TechnologyMulti-frequency simultaneous transmission