dS1242
dS1242 User Manual v4.10
Status page
You should now see the following page:
This status page shows you the system firmware revision as well as the supplied voltage to the
board and its internal temperature.
If you hover your mouse cursor over the menu buttons on the left, the help panel will give you
an overview of each one.
The system reboot button should be used with caution. If the module is at a remote site and
you change the IP address, you may not be able to reach it again.
Copyright © 2016-2021, Devantech Ltd.
All rights reserved.
www.robot-electronics.co.uk
11
To Next Page
Loading...
Need help?
General