DeVilbiss SleepCube DV53 Standard Plus CPAP - Quick View Menu Information

20
SE-DV53-1
EN
aDVancED mEnu controlS
DV53 Standard Plus Quick View Menu Layout
The Quick View Menu shows a summary of information which is reported in the
SmartCode data. Information in the Quick View includes: Number of days used more than
4 hours (or can be set to 5 hours by clinician), AHI (Apnea/Hypopnea Index), High Leak
percent (percent of time at leak >95 L/m), and Daily Usage (average hours per day used).
Each parameter can be viewed in any of four time periods, 1 day, 7 days, 30 days and 90
days.
The following chart shows the Quick View information that is available on your CPAP
display if viewing this information has been enabled by your provider. The Quick View
menu shows a summary of your SmartCode data for 1, 7, 30, and 90 day periods. Each of
the time periods contains info for "Number of Days > x hrs", Apnea Hypopnea Index (AHI),
High Leak % (>95 L/m) and Average Daily Hours of while breathing use.
Diagram of CPAP displays
Days ≥ 4H 1d
1/ 1 (100%)
AHI 1d
31.5+
High Leak 1d
31+%
Daily Usage 1d
9.3+ hours
Exit Menu
Press 
Days ≥ 4H 7d
7/ 7 (100%)
AHI 7d
31.5+
High Leak 7d
31+%
Daily Usage 7d
9.3+ hours
Days ≥ 4H 30d
30/30 (100%)
AHI 30d
31.5+
High Leak 30d
31+%
Daily Usage 30d
9.3+ hours
Days ≥ 4H 90d
90/90 (100%)
AHI 90d
31.5+
High Leak 90d
31+%
Daily Usage 90d
9.3+ hours
UP () DOWN () buttons
RIGHT () LEFT () buttons