32
SE-DV53-1
EN
guiDancE & manufacturEr'S
DEclaration
Guidance and Manufacturer’s Declaration – Emissions All Equipment and
Systems
This device is intended for use in the electromagnetic environment specified below. The
customer or user of this device should assure that it is used in such an environment.
Emissions Test Compliance Electromagnetic Enforcement – Guidance
RF Emissions
CISPR 11
Group 1
This device uses RF energy only for its internal
function. Therefore, its RF emissions are very
low and are not likely to cause any interference
in nearby electronic equipment.
RF Emissions
CISPR 11
Class B
Radiated and
Conducted Emissions
This device is suitable for use in all
establishments including domestic, and those
directly connected to the public low-voltage
power supply network that supplies buildings
used for domestic purposes.
Harmonics
IEC 61000-3-2
Class A
Flicker
IEC 61000-3-3
Complies