Devolo GigaGate Series - 26 4.3.2 Basic Settings

Network configuration 43
devolo GigaGate
either be entered manually or obtained
automatically (default setting) from a DHCP
server.
Manual configuration requires that
you enter the IP address, subnet
mask, default gateway and the name server.
If a DHCP server is already present in
the network for giving out IP
addresses, have this option enabled so that
the devolo GigaGate automatically receives
an address from it. This is usually the router.
4.3.2 Basic settings
In the Basic settings area, you will
find some familiar settings from the
Status overview as well as
additional settings for Language selection and
Advanced settings for individually adjusting
your devolo GigaGate device.
Satellite:
Select language
Device security
Network settings
System
Advanced settings
Base:
Select language
Device security
Network settings
System
Advanced settings
Click or tap the respective icon to go the
corresponding area.
Selecting the menu language
Select language