46 Network configuration
devices, for encryption, for WiFi mode and the
option to connect other devolo GigaGate
Satellite devices with the devolo GigaGate
Base. Bridge configuration
You can find more information on devolo
GigaGate configuration in Chapter 4.3.1
Status overview. Bridge expansion
You can expand your existing devolo GigaGate
network with additional devolo GigaGate
Satellite devices.
Pairing additional devolo GigaGate
Satellite devices with the devolo
GigaGate bridge Bridge pairing via push
button
(home button) Start pairing
Click/touch Start pairing to automatically
establish a connection.
Bridge pairing using security ID
Enter the security ID (Sec ID) for the devolo
GigaGate Base in the configuration interface
of the devolo GigaGate Satellite. This is found
on the underside of the device.
Take note of the security ID for all
devolo GigaGate devices before the
networking procedure. This unique ID is found
on the label on the underside of the housing.
It consists of 16 letters. Make sure that all
devolo GigaGate devices are connected to the
mains supply and, if applicable, to the
computer or the corresponding network
components.
4.3.4 Mobile devices
In the Mobile devices area, you will
find settings for integrating WiFi-
compatible terminal devices into
the WiFi network of the devolo GigaGate
Satellite. Installation of new WiFi devices can
either happen automatically or using the entry
To Next Page
Loading...
Need help?
General
