Devolo GigaGate Series User Manual

Network configuration 47
devolo GigaGate
of the WPS pin. In addition, the network name,
encryption or WiFi mode of the devolo
GigaGate Satellite can be changed here.
The devolo GigaGate offers two different
variants for transmitting these security keys:
WPS via PBC (push button) (WiFi button):
Start the encryption process on the devolo
GigaGate
either by pressing the WiFi button on the
front panel of the devolo GigaGate
Satellite or
by going into the interface under devolo
GigaGate Satellite Mobile devices
Terminal devices, automatic (WPS)
WPS via PCB (Push Button) and
pressing the Start setup button.
Then either press the WPS key of the WiFi
device you are adding or enable the WPS
mechanism in the WiFi settings of the WiFi
device. Now the devices exchange their
security keys and establish a secure WiFi
connection. The WiFi LED on the front
panel indicates the synchronisation
process by flashing.
WPS via PIN:
To interconnect WiFi devices in your wireless
network securely by means of PIN variants,
enter an individualised key in the
configuration interface under devolo
GigaGate Satellite Mobile devices
Terminal devices, automatic (WPS)
WPS via PIN and start the encryption
process by pressing the Start setup button.
Open the configuration interface of the WiFi
station to be added and transmit the PIN

Devolo GigaGate Series Specifications

General

Frequency Band	2.4 GHz / 5 GHz
MIMO	Yes
Product Type	Wireless Access Point
WiFi Standard	IEEE 802.11ac
Security	WPA2