DFI BT253 - Page 34

Chapter 3
www.df .com
34
Chapter 3 BIOS Setup
Ipv4 PXE Support
When enabled, Ipv4 PXE boot supports. When disabled, Ipv4 PXE boot option will not
be created.
Ipv6 PXE Support
When enabled, Ipv6 PXE boot supports. When disabled, Ipv6 PXE boot option will not
be created.
PXE boot wait time
Enter the w ait time v alue to abort the PXE boot.
CSM Configuration
This section configures the CSM set tings.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Compatibility Support Module Confi guration
CSM16 Module
Version
Boot option fi lter
Option ROM execution order
Launch PCI-E NIC PXE
Storage
Other PCI devices
Advanced
07.71
[UEFI and Legacy]
[Do not launch]
[Legacy only]
[UEFI only]
 Select Screen
 Select Item
Enter: Select
+/
-:
Change Opt.
F1: General Help
F2: Previous Values
F4: Save & Reset
ESC: Exit
This option controls
Legacy/UEFI ROMs
priority
Boot option filter
This option controls Legacy/UEFI ROMs priorit y.
Launch PCI-E NIC PXE
This field controls the ex ecution of PXE OpROM.
Storage
This field controls the ex ecution of UEFI and Legacy Stor age OpROM.
Other PCI devices
This field determines OpROM ex ecution policy f or devices other than network, stor age
or video
.