85
3
BIOS Setup
Power Management Setup
The Power Management Setup allows you to configure your system
to most effectively save energy.
The settings on the screen are for reference only. Your version may not be identical
to this one.
ACPI Function
This function should be enabled only in operating systems that
support ACPI. Currently, only Windows
®®
®®
®
98SE/2000/ME/XP sup-
ports this function. When this field is enabled, the system will ignore
the settings in the “HDD Power Down” field. If you want to use the
Suspend to RAM function, make sure this field is enabled then select
“S3(STR)” in the field below.
ACPI Suspend Type
This field is used to select the type of Suspend mode.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
To Next Page
Loading...
