97
3
BIOS Setup
Enable All DIMM Clock
This field is used to enable or disable all DIMM clock.
S/W Memory Hole Remapping
This field is used to enable the software to remap the physical
memory to an address higher than 00E0.
MTRR Mapping Mode
This field is used to disable or continue the MTRR mapping mode.
DRAM ECC Feature Control
This field is used to enable the DRAM’s ECC feature.
ECC Memory Interlock
Leave this in its default setting.
ECC MCE Enable
Leave this in its default setting.
Chip-Kill Mode Enable
Leave this in its default setting.
ECC Redirection
Leave this in its default setting.
DRAM Background Scrubber
Leave this in its default setting.
L2 Cache Background Scrubber
Leave this in its default setting.
DCache Background Scrubber
Leave this in its default setting.
To Next Page
Loading...
