MODEL BMG-535 GRINDER
SECTION 3 GENERAL
16
OPERATING MANUAL
APRIL 2009
Grinding & Polishing
The individual tooling heads rotate at approximately 1250 revs/min. The Lower
Housing rotates at approximately 82 revs/min.
Fig. 3.2
Before Switching on the BMG-535, the front part of the grinding machine
must be
lifted by pushing the handgrip (1) down toward floor level till the front of the
machine is approximately 4 inches (10 cm) from the ground.
3.4 OPERATING ELEMENTS
To Next Page
Loading...
