2.5.1. Checking Battery Level
To determine the battery level of your sensor:
1. Pair your sensor to your iOS device. (Click here to learn how.)
2. Navigate to the Pair Sensor Page from the main menu of the app.
3. Select the ‘i’ to the far right of your SwingTracker
4. This next page is your Sensor Information, you’ll see an option that says Battery Level
The sensor will go into sleep mode and the light will stop blinking if you stop using it for five minutes. It
will automatically wake up and the green power light will turn on once the sensor is picked up.
The battery will last up to 7 hours with continuous use.
Diamond Kinetics SwingTracker - 1
Page 19 of 107
To Next Page
Loading...
