To Next Page

To Previous Page

1. INTRODUCTION

Thank you for purchasing DIG’s 400A Series Single Station Battery Powered

Controller. This manual describes how to get the 400A Series controller up and

running quickly. After reading this manual and becoming familiar with the basic

functionality of the controller, use the manual as a reference for less common

tasks in the future.

2. ABOUT THE 400A SERIES BATTERY OPERATED

CONTROLLERS

The 400A Series watering controller employs the latest irrigation programming

features to allow for complete control of any irrigation system and comes

assembled on an in-line valve or the controller only with adapters to ﬁt most

manufacturers valves. The 400A Series is available in single station with a rain

sensor connection, and is powered by two AA batteries that can last up to 3 years

[using name brand alkaline batteries]. The controller is enclosed in a compact,

waterproof housing to protect it from the elements.

Questions and Answers:

Need help?

Do you have a question about the DIG 400A Series and is the answer not in the manual?

DIG 400A Series Specifications

General