14
To delete a start time:
1. Press
until START 1 appears.
2. Press
until the start time appears that you want to delete.
3. Press
until the word OFF appears.
Press the
button to proceed to the next step RUN TIME or to review
the program.
11. SETTING WATERING RUN TIME DURATIONThis setting
determines the length of time the RBC 7000 smart timer will allow the valve
to remain open (duration is from 1 minute up to 5 hours and 59 minutes). For
example, setting watering run time to 10 minutes on certain days of the week will
program the timer to turn the water on for 10 minutes on each of the days chosen
and at every start time selected. (Note: if the timer is set to water every X hours,
the maximum duration is 59 minutes)
To set the watering run time
:
1. Press the button until the
icon appears and OFF or the last run time
setting appears. (OFF will appear if duration is set to 0)
2. Press the
button, and 0:05 (or the last run time programmed) appears.
14
To Next Page
Loading...
Need help?
General
