17
Note: OFF appears in between numeric value of 99 and 1.
Press the
button to review the program or to exit.
13. MANUAL WATERING
The manual mode allows the user to test the system and water for a specified run
time set in watering duration. The timer will automatically stop watering at the end of
the defined irrigation period. The originally programmed irrigation schedule continues
to function at the times assigned. The sensor condition is disregarded in this mode.
To start a manual run,
1. Press the
button, and the icon and icon appears. ON appears
momentarily and then the last watering duration is displayed with
.
The timer will open the valve and in 5 seconds a count down of the remaining
irrigation duration appears, showing when the timer will close the valve.
2. Press the button to end manual run.
3. After 5 seconds the display will revert to the current time screen.
To Next Page
Loading...
