Digi-Frame A4 Multi-Purpose User Manual

25
10.2 The System LED light pattern
Light
Description
Steadily on
The scanner is ready for use.
Blinks
continuously
 Initializing system and memory card/USB
flash drive. Please wait until the initialization
process is complete before using the
scanner.
 Busy scanning and storing image files.
Please wait until the process is complete
before scanning another original.
 Sensor cleaning in progress. Please wait
until the process is complete before
performing any operations.
2 Blinks
Paper jam. Press the Custom button for about
0.5 seconds; the scanner will back out the
original so you can remove it from the input
slot.
3 Blinks
Memory card error. Remove the memory card
to clear this error status.
4 Blinks
Calibration failed. Error indication only.
5 Blinks
Scan to PC failed. The PC may be busy or
unavailable.
No light
The scanner is powered off.

Digi-Frame A4 Multi-Purpose Specifications

General

Brand	Digi-Frame
Model	A4 Multi-Purpose
Category	Scanner
Language	English