6
3. Installation & Operation
Precautions
Keep the product out of direct sunlight. Direct exposure
to the sun or excessive heat may cause damage.
Do not store/operate the product in humid or dusty
conditions.
Place the product securely on an even, flat surface. Tilted
or uneven surfaces may cause mechanical or paper-
feeding problems.
Retain the product box and packing materials for shipping
purposes.
3.1 Install the battery
To install the battery into the scanner:
Open the battery cover underneath the scanner.
Remove the plastic tab to connect battery and replace
cover.
If you need to remove the battery take extra care that the
copper contacts are not bent/damaged when replacing
battery. (This type of damage is not covered under
warranty)
Note:
To Next Page
Loading...
Need help?
General
