HI, MI, WI-700 service manual - 8 – recommended spare parts
8-2 Issue 9 04/2020
Electrical cabinet - based on LV-67P PC main board
ES1-00067 Emergency stop button
ES1-00071 Contact block (switch) for emergency stop button
565-737 Motor driver AXHD50K
568-717 A/D unit
568-701 Power supply for A/D
EM1-00212 24v power supply
EF3-03201 Fuse 10A (for 240V machines)
EF4-03801 Fuse 10A (for 110V machines)
EF3-00801 Fuse 315mA
EF2-01010 Fuse 0.5A (for A/D PSU 240v)
EF3-02401 Fuse 1A (for A/D PSU 110v)
EX0-00041 UPS control board (Pico UPS-100)
B578-723 15.8v Power supply (LS75-15-15VDC)
EX0-00065 PC main board (LV-67P)
B569-094-04 Solid state hard drive - (pre-programmed with standard Console software)
B569-095-04 Solid state hard drive - (pre programmed with Worldview software)
568-753 Programmed Omron plc (does not include MAD 11 unit)
EM1-00100 Omron CPM2C-MAD11
EM1-00098 Omron power supply (CPM2C-PA201)
EM1-00154 Relay 5VDC
Screen assembly-LED type display screen 12.1’’
565-985 Touch panel
565-670 LED screen
B569-185 Assy USB touch PCB
563-153-C2 Seal for touch panel
Screen assembly - 15’’
EX3-00029 15’’ touch panel / screen - LVDS version
EX3-00030 15’’ touch panel / screen - VGA version
Pack sensors
568-760 Fibre optic sensor amp assembly (includes amp & fibre optic)
ES4-00017 Wenglor Pack Sensor (KR87NCT2)
565-744 Standard reflector (for pack sensor) - refer to parts manual for other types
Scale
B568-837 Load cell assembly (15kg
B568-838 Load cell assembly (30kg)
Select correct fuse rating depending on 240v
or 110v machine type
NOTES:
• 24v power supply note: if machine is pre October 2016, the first time this power supply is replaced,
a kit is required - kit = 569-169-A4 (includes EM1-00212 psu plus new mounting brackets)
• Worldview hard drive (B569-
095
-04) is a replacement drive for a machine already running
Worldview. It does not function as a conversion from Console to Worldview
See note
below
Important - select correct screen version,
dependent on machine specification when
built / modified
See note below
Machine will have either 15kg or 30kg. Select
correct size
To Next Page
