AT commands Network commands
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
107
Value Description
0 Autodetect from inserted ICCID (SIM) [default]
1 Reserved
2 AT&T
3 Verizon
Default
0
AM (Airplane Mode)
When set, the cellular component of the XBee Smart Modem is fully turned off and no access to the
cellular network is performed or possible.
Parameter range
0 - 1
0 = Normal operation
1 = Airplane mode
Default
0
Network commands
The following commands are network commands.
IP (IP Protocol)
Sets or displays the IP protocol used for client and server socket connections in IP socket mode.
For TLS, the ublox SARA-R4 series AT Commands Manual provides the list of supported cipher suites
under the SSL/TLS security layer profile manager +USECPRF heading.
Parameter range
0 - 4
Value Description
0x00 UDP
0x01 TCP
0x02 SMS (Transparent mode)
0x03 Reserved
0x04 SSL over TCP
To Next Page
Loading...
