Digi XBee3 - D2 (Dio2;Ad2); D3 (Dio3;Ad3)

AT commands I/O settings commands
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
117
Parameter Description
0 Disabled
1
SPI_ATTN
2 ADC
3 Digital input
4 Digital output, low
5 Digital output, high
6 I2C SCL
Default
0
D2 (DIO2/AD2)
Sets or displays the DIO2/AD2 configuration (pin 18).
Parameter range
0 - 5
Description
0 Disabled
1
SPI_CLK
2 Analog input
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
0
D3 (DIO3/AD3)
Sets or displays the DIO3/AD3 configuration (pin 17).
Parameter range
0 - 5
Parameter Description
0 Disabled