Digi XBee3 - P0 (DIO10;PWM0 Configuration)

AT commands I/O settings commands
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
120
Parameter Description
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
1
Sets or displays the DIO9/ON_SLEEP configuration (pin 13).
Parameter range
0, 1, 3 - 5
Parameter Description
0 Disabled
1
ON/SLEEP output
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
1
P0 (DIO10/PWM0 Configuration)
Sets or displays the PWM/DIO10 configuration (pin 6).
This command enables the option of translating incoming data to a PWM so that the output can be
translated back into analog form.
Parameter range
0 - 6
Parameter Description
0 Disabled
1 RSSI PWM0 output
2 PWM0 output
3 Digital input
4 Digital output, low