Digi XBee3 - ATFS RM File_Or_Directory; Atfs Info; ATFS FORMAT Confirm

AT commands File system commands
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
136
Note Unlike a computer's command prompt which moves a file into the dest_path if it is an existing
directory, you must specify the full name for dest_path.
ATFS RMfile_or_directory
Removes the file or empty directory specified byfile_or_directory.This command fails with an error
iffile_or_directorydoes not exist, is not empty, refers to the current working directory or one of its
parents.
ATFS INFO
Report on the size of the filesystem, showing bytes in use, available, marked bad and total.The report
ends with a blank line, as with most multi-line AT command output. Example output:
204800 used
695296 free
0 bad
900096 total
ATFSFORMAT confirm
Reformats the file system, leaving it with a default directory structure.Pass the word confirm as the
first parameter to confirm the format. The XBee Smart Modem responds withFormatting..., adds a
period every second until the format is complete and ends the response with a carriage return.