Digi XBee3 - Getting Started with the Xbee Smart Modem Development Kit

Getting started with the XBee Smart Modem
Development Kit
This section describes how to connect the hardware in the XBee Smart Modem Development Kit, and
provides some examples you can use to communicate with the device.
There are some initial examples of how to use the device, followed by introductory MicroPython
examples and finally some advanced examples in More examples.
Identify the kit contents 13
Connect the hardware 14
XBIB-U-DEV reference 16
Cellular service 17
Configure the device using XCTU 18
Connect to the ELIZA server 21
Connect to the Echo server 23
Connect to the Daytime server 25
Get started with MicroPython 26
More examples 32
Software libraries 48
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
12