Digi XBee3 - I;O Settings Commands; D0 (Dio0;Ad0); D1 (Dio1;Ad1)

AT commands I/O settings commands
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
116
Parameter range
0x00 - 0x05
Parameter Description
0x00 API disabled (operate in Transparent mode)
0x01 API enabled
0x02 API enabled (with escaped control characters)
0x03 N/A
0x04 MicroPython REPL
0x05 Bypass mode
Default
0
I/O settings commands
The following AT commands are I/O settings commands.
D0 (DIO0/AD0)
Sets or displays the DIO0/AD0 configuration (pin 20).
Parameter range
0, 2 - 5
Parameter Description
0 Disabled
1 N/A
2 Analog input
3 Digital input
4 Digital output, default low
5 Digital output, default high
Default
0
D1 (DIO1/AD1)
Sets or displays the DIO1/AD1 configuration (pin 19).
Parameter range
0 - 6