Getting started with the XBee Smart Modem Development Kit More examples
Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
34
17. Click Send selected packet.
18. A GETHTTP response from httpbin.org appears in the Console log.
Debugging
If you experience problems with the settings in this example, you can load the default settings in
XCTU:
1.
On the Configuration toolbar, click the Default button to load the default values
established by the firmware, and click Yes to confirm.
2. Factory settings are loaded but not written to the device. To write them, click the Write button
on the toolbar.
To Next Page
Loading...
