Digi XBee3 - Page 8

Digi XBee3 Cellular LTE-M Global Smart Modem User Guide
8
VR (Firmware Version) 129
VL (Verbose Firmware Version) 129
HV (Hardware Version) 130
AI (Association Indication) 130
HS (Hardware Series) 130
CK (Configuration CRC) 131
Diagnostic interface commands 131
DI (Remote Manager Indicator) 131
CI (Protocol/Connection Indication) 131
Execution commands 133
NR (Network Reset) 133
!R (Modem Reset) 133
File system commands 133
Error responses 134
ATFS (File System) 134
ATFS PWD 134
ATFS CDdirectory 134
ATFS MDdirectory 135
ATFS LS [directory] 135
ATFS PUTfilename 135
ATFS XPUTfilename 135
ATFS HASHfilename 135
ATFS GETfilename 135
ATFS MVsource_pathdest_path 135
ATFS RMfile_or_directory 136
ATFS INFO 136
ATFSFORMAT confirm 136
Operate in API mode
API mode overview 138
Use the AP command to set the operation mode 138
API frame format 138
API operation (AP parameter = 1) 138
API operation with escaped characters (AP parameter = 2) 139
API frames
AT Command - 0x08 143
Transmit (TX) SMS - 0x1F 144
Transmit (TX) Request: IPv4 - 0x20 145
Tx Request with TLS Profile - 0x23 147
AT Command Response - 0x88 149
Transmit (TX) Status - 0x89 150
Modem Status - 0x8A 152
Receive (RX) Packet: SMS - 0x9F 153
Receive (RX) Packet: IPv4 - 0xB0 154
Configure the XBee Smart Modem using Digi Remote Manager
Create a Remote Manager account 156
Get the XBee Smart Modem IMEI number 156
Add a XBee Smart Modem to Remote Manager 156