DigiDesign Digi 002 Getting Started Guide

Digi 002 & Digi 002 Rack Getting Started Guide84
5 Play the instrument or sound source at the
volume you will record.
6 Adjust the input gain for the channel using
the gain knob (located on the top panel of the
Digi 002, and on the front panel of the
Digi 002 Rack). Increase or decrease gain until
you are able to achieve maximum peak levels in
the Auxiliary Input track meter without clip-
ping. Typically such peak levels are in the yellow
area of the meter.
Mic/Line High-Pass Filters
Mic/Line Inputs 1–4 include a high-pass filter
set at 75 Hz. This filter can be useful for filtering
out low-end rumble from a noisy recording en-
vironment, microphone handling, or AC noise.
Recording an Audio Track
To record an audio track:
1 Assign the input for a track and set its input
levels.
2 Click the Track Record Enable button.
3 Choose Window > Transport to display the
Transport window.
4 Click Return To Zero to start recording from
the beginning of the session. You can also record
according to a selection or from the cursor loca-
tion in the Edit window.
5 Click Record in the Transport window to en-
able recording.
6 Click Play or press the Spacebar to record on
all record-enabled tracks.
7 Record your performance.
8 Click Stop in the Transport window or press
the Spacebar when you are finished recording.
To play back a recorded track:
1 Click the track’s Record Enable button a sec-
ond time to take it out of Record mode.
2 Click Play in the Transport window or press
the Spacebar to start playback.
3 Click Stop in the Transport window or press
the Spacebar to stop playback.
High Pass Filter switches (front panel)
Record enabling a track in the Mix window
1 GAIN 2 GAIN 3 GAIN 4 GAIN
LINE/ INST
MIC
High Pass Filter switches
Transport window (Expanded view shown)
Fast Forward
Record Enable
Go to EndPlay
Stop
Rewind
Return to Zero
Online

DigiDesign Digi 002 Specifications

General

Brand	DigiDesign
Model	Digi 002
Category	Musical Instrument
Language	English