Digital Projection E-Vision Laser 8500 Series - Possible Combinations of Settings

page 74
Digital Projection E-Vision Laser 7500 & 8500 Series
Operating Guide
POSSIBLE COMBINATIONS OF SETTINGS
Rev B September 2016
Possible Combinations Of Settings
Some OSD settings cannot be used in combination with others. The table below shows the possible combinations.
A tick (ü) means that the combination is possible. A cross () means applying the new setting is impossible if the existing setting is being
used. A number sign (#) means applying the new setting will disable the existing one.
3D
Warp /
Geometry
Blending
Picture
Mode
Color
Temp.
Overscan
Aspect
Ratio
Digital
Zoom
PIP
Dynamic
Black
3D
ü ü    ü   
Warp /
Geometry
ü ü ü ü ü ü ü ü ü
Blending
ü ü ü ü ü ü ü ü 
Picture Mode
#
ü ü ü ü ü ü ü ü
Color Temp.
#
ü ü ü ü ü ü ü ü
Overscan
#
ü ü ü ü ü ü ü ü
Aspect Ratio
ü ü ü ü ü ü ü ü ü
Digital Zoom
#
ü ü ü ü ü ü ü ü
PIP
#
ü ü ü ü ü ü ü ü
Dynamic
Black
#
ü
#
ü ü ü ü ü ü
Notes
Existing
Setting
New
Setting