Digital Projection E-Vision Laser 8500 Series User Manual

page 90
Digital Projection E-Vision Laser 7500 & 8500 Series
Reference Guide
APPENDIX A: LENS PART NUMBERS
Rev B September 2016
Appendix A: Lens Part Numbers
Throw ratios Part number Focus range Lens shift Lens extension
0.38 : 1 xed (UST) 117-341 0.82 m - 2.71 m none 292.5 mm
0.75 - 0.93 : 1 zoom 115-339 1.02 m - 12.7 m V: 0.5 (U) 0 (D) frame
H: 0.1 (L) 0.1 (R) frame
59.4 mm
0.76 : 1 xed 112-499 0.81 m - 5.08 m none 30 mm
1.25 - 1.79 : 1 zoom 112-500 1.33 m - 11.73 m V: 0.5 (U) 0 (D) frame
H: 0.1 (L) 0.1 (R) frame
36.5 mm
1.72 - 2.27 : 1 zoom 112-501 1.83 m - 14.9 m V: 0.5 (U) 0 (D) frame
H: 0.1 (L) 0.1 (R) frame
10.8 mm
2.22 - 3.67 : 1 zoom 112-502 2.36 m - 24.2 m V: 0.5 (U) 0 (D) frame
H: 0.1 (L) 0.1 (R) frame
29.9 mm
3.58 - 5.38 : 1 zoom 112-503 3.8 m - 35.35 m V: 0.5 (U) 0 (D) frame
H: 0.1 (L) 0.1 (R) frame
46.7 mm
5.31 - 8.26 : 1 zoom 112-504 5.59 m - 54.8 m V: 0.5 (U) 0 (D) frame
H: 0.1 (L) 0.1 (R) frame
87.3 mm
Notes
Throw distance calculations are
based on the distance from the outer
end of the lens, which will vary from
lens to lens.
The 0.38 : 1 xed lens has no
adjustable shift value. However,
the lens has an inherent offset
depending on image size. See
the UST documentation published
separately on the Digital Projection
website.f

Digital Projection E-Vision Laser 8500 Series Specifications

General

Brand	Digital Projection
Model	E-Vision Laser 8500 Series
Category	Projector
Language	English