DigiTech RP12 User Manual

54
• Press Function button <MIX ™> and the display will look something
like this:
• Press Function button <Name> button and the display will look some-
thing like this:
• Using the <UP/DOWN> Parameter buttons, scroll to the character
you want to use, or press one of the Function buttons. When you
have selected the character you want, press the <RIGHT> Parameter
key. Note that the cursor moves to the next character. Repeat this
procedure until the Bank name is satisfactory.
• Once the bank has been named, press function button <Name> to
exit Bank naming utility.
Top 5-1
¡CAPs ™SPC £NUM
¡BANK NUMBER 1
Top 5-1
¡LEDs:Normal
≤™Bank Names
Section 6 - Pedalboard Set-Up
RP-12 Owner’s Manual

DigiTech RP12 Specifications

General

Brand	DigiTech
Model	RP12
Category	Music Pedal
Language	English