Amount Selects the bend range of the Whammy™ Module. There are 16 ranges available in the Whammy
Module. They are as follows:
Whammy Harmony
Oc1u= Up 1 Octave OdOu=Down 1 Octave - Up 1 Octave
Oc2u=Up 2 Octaves 4-3d=Down 4th - Down 3rd
2ndr=Down 2nd Reversed 5-6u=Up 5th - Up 6th
2ndd=Down 2nd 4-5u=Up 4th - Up 5th
4thd=Down 4th 3-3u=Up m3rd - Up Maj 3rd
Oc1d=Down 1 Octave 2-3u=Up 2nd - Up 3rd
Oc2d=Down 2 Octaves 4d5u=Down 4th - Up 5th
Oc6d=Down 6 Octaves 5uOu=Up 5th - Up Octave
The RP14D also includes an intelligent Harmony Pitch Shifter. The difference between a Pitch Shifter and an intelligent Pitch Shifter is that
the Pitch Shifter stays parallel to your note at the specified interval, and an intelligent Pitch Shifter knows which notes to make sharp or flat
in order to keep the shifted pitches within the specified key and scale. The intelligent Harmony module lets you select the key, scale and
amount of shifting in the signal and all shifted notes will remain diatonically correct. The parameters are as follows:
Amount Amount lets you select the interval of the shifted pitch. This Ranges from one Octave down to one Octave
Up.
Scale This parameter lets you select the scale that is being used in the Harmony effect. There are fourteen dif-
ferent scales and they are numbered as follows:
1. Major 6. Mixolydian 11. Blues
2. Minor 7. Lydian 12. Whole Tone
3. Harmonic Minor 8. Lydian Augmented 13. Half-Whole Diminished
4. Melodic Minor 9. Major Pentatonic 14. Whole-Half Diminished
5. Dorian 10. Minor Pentatonic
Key This parameter lets you select the key signature for the harmonies. This ranges from C to B.
*Note: These Parameters can be assigned to the Expression Pedal. See page 11 for more information on Expression Pedal
assignments.
To Next Page
Loading...
Need help?
General
