31
MANAGING SONGS
Storing Songs
The TRIO+ autosaves all songs and loops on the included microSD card. Up to 12 songs (each with up to 5
parts with loops) can be stored to an installed microSD card. See 'microSD Card Information' on page 4 for
information on compatible microSD cards.
NOTE: To ensure that you don’t unexpectedly lose data, always stop the TRIO+ playback and wait at least 5
seconds without making changes to your songs before ejecting the SD card or removing power to the pedal.
Songs and loops can also be managed on a computer using the free TRIO Manager software for Mac and PC. See
'TRIO Manager Software/Firmware Updates' on page 57 for more information on the TRIO Manager software.
Creating A New Song
To create a new song:
1. Press the SONG button.
2. Turn the STYLE knob to select an empty song (the STYLE LEDs will be off
for empty songs).
3. Press the SONG button or BAND footswitch to exit.
Loading A Song
To load a song:
1. Press the SONG button.
2. Turn the STYLE knob to select a song to load (previously stored songs will
be lit dim red).
TIP: When a song is selected with the STYLE knob, the SEQ, PART,
ALT TIME, GENRE, SIMPLE BASS, LOOPER, and BAND LEDs will
provide indication of the selected song's state.
3. Press the SONG button or BAND footswitch to exit. Note that the TRIO+
will take a brief moment to load the song. Loading is complete when the
SONG button LED goes off and all other LEDs return to normal operation.
Clearing A Song
To clear a song:
1. Press the SONG button.
2. Turn the STYLE knob to select the song to clear.
3. Press and hold the SONG button for 2 seconds to clear the selected song
(the selected song's LED will briefly flash bright red). Note that clearing a
song cannot be undone.
NOTE: clearing a song cannot be undone.
To Next Page
Loading...
Need help?
General
