2 www.dimplex.com
Always use a qualied technician or service agency to repair this replace.
!
NOTE: Procedures and techniques that are considered important enough to emphasize.
CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment.
WARNING: Procedures and techniques which, if not carefully followed, will expose the user to the risk of re, serious
injury, or death.
Operation ...............................................................3
Maintenance ............................................................5
Exploded Parts Diagram - PF2325 Mod 0-A ...................................6
Exploded Parts Diagram - PF2325 Mod B-C ..................................7
Exploded Parts Diagram - PF3033 Mod 0-A ...................................8
Exploded Parts Diagram - PF3033 Mod B-C ..................................9
Wiring Diagram .........................................................10
Main Control Board Replacement (Mod 0-A units) ...........................12
Floating Display Assembly (Mod 0-A units) ................................12
Floating Display Assembly / Main Control Board Replacement (Mod B-C units) ..13
Relay Board Replacement (Mod B-C units) .................................13
Power Supply Replacement (Mod B units Only) ............................13
gWave
TM
Assembly Replacement .........................................14
Heater Assembly Replacement ...........................................14
Flame LED Light and Media Light Assembly Replacement ...................15
Top Light Replacement .................................................15
Flicker Motor & Rod Replacement ........................................15
Power Cord Replacement ...............................................16
Log set Replacement ...................................................16
Log Set Junction Board Replacement Mod 0-B .............................17
Lower & Media LED Light Assembly Replacement ..........................17
Partially Reective Glass Replacement ....................................18
Power Regulator Board Installation (Mod 0 units only) .......................18
Troubleshooting Guide ..................................................19
Table of Contents