DINA SAFEONE DN3PD2 - Page 13

2 Safety
SAFEONE DN3PD2 Manual 8
 DINA Elektronik GmbH accepts no liability for any recommendations given or implied in
the following description.
 No new guarantee, warranty or liability claims that go beyond DINA Elektronik GmbH's
general delivery conditions can be derived from the following description.
 To prevent EMC disturbances, the physical environmental and operating conditions
where the product is installed must correspond to the EMC section of DIN EN 602041.
 If contact outputs are used, the safety function must be requested at least once per
month for Performance Level (e) and once per year for Performance Level (d).
2.6 Working on live parts
WARNING
Electric shock – dangerous voltage! Touching live components can cause se-
vere or even fatal injury, depending on circumstances, as a result of an electric
shock.
► Never assume that a circuit is dead.
► Always check circuits as a safety precaution! Components being worked on
may only be live if this is absolutely necessary and stipulated.
► Accident prevention regulations (e.g. VBG4 and VDE 105) must be ob-
served during all work.
► Only use suitable, intact tools and measuring equipment.