and the side-shift function in one or both
directions is not operative. Stabilise the
position of the boom with respect to the slope
as shown below. Follow the procedure to
lower the boom before moving the machine to
a stable, level surface. Do not rotate the boom
while lowering it.
If the inclination alarm sounds when the
platform is oriented towards the ascending
part of the slope:
Do not raise the boom if the wind speed
can exceed 12.5 m/s. If the wind speed
exceeds 12.5 m/s when the boom is raised,
lower the boom and suspend use of the
machine.
Do not increase the surface or the load of the
platform. The increased surface exposed to
the wind reduces the stability of the machine.
Use utmost caution and low speed when the
machine is moved with the platform retracted
on surfaces that are irregular, unstable, with
detritus or slippery, or near ditches and cliffs.
Do not move the machine or close to irregular,
unstable surfaces or those with other
hazardous conditions when the boom is raised
or extended.
Make sure the ground is able to support the
weight of the machine indicated in the
technical specifications in the Manual. Do not
use the machine on muddy, icy, slippery,
uneven ground or where there are holes in the
ground.
Do not use the machine to lift hanging loads;
do not use it as a crane.
Do not use the machine to lift loads in the
platform, and it must not be used as a lift.
Do not use the machine to transfer persons
from one floor to another one, and do not use it
as a lift.
Do not use the machine to lift hanging loads;
do not use it as a crane.
Do not use the machine to lift loads in the
platform, and it must not be used as a lift.
Do not use the machine to transfer persons
from one floor to another, do not use it as a lift.
Do not push the machine or other objects
using the machine boom.
Do not allow the boom to come in contact with
adjacent structures.
Do not fix the boom or platform to adjacent
To Next Page
Loading...
