Do not modify or deactivate the components
which affect the safety and stability of the
machine.
Do not replace the components crucial for the
stability of the machine with components
which have different weight or technical
specifications.
Do not replace the original tyres with tyres
having different technical specifications or
different serial number.
Do not replace the tyres with original foam
rubber filling with tyres having inner tube. The
weight of the wheels is important for the
stability of the machine.
The tyres with wide profile must be installed by
the machine manufacturer. Do not replace the
original standard tyres with models having
wide profile.
Do not modify or alter an aerial work platform
without written authorisation from the
manufacturer. Attaching fittings for supporting
tools and other materials on the platform, on
the foot board or on the platform railing
increases the weight and exposed surface of
the platform or of the load.
Do not transport equipment and materials if
the load is not distributed appropriately and if it
cannot be controlled by personnel on the
platform in safety conditions.
Do not use the machine on a mobile surface or
on a moving vehicle.
Make sure all the tyres are in good condition,
that the pressure of the tyres with inner tube is
appropriate and that the crown nuts are
tightened correctly.
Do not use the controls in the platform to free
the platform if it is blocked or obstructed in any
way by an adjacent structure which prevents
its normal movement. All the workers must
leave the platform before trying to free it using
the controls on the ground.
To Next Page
Loading...
