41
© 2008 Directed Electronics. All rights reserved.
Select a Feature. Press and release the Valet/Pro-3.
gram switch the number of times corresponding
to the feature you wish to change. For example,
to access the third feature, press and release 3
times. Then press the button once more and HOLD
it. The LED flashes and horn honks the number of
times equal to the feature you have accessed.
Program the Feature. While holding the Valet/Pro-4.
gram switch, you can toggle the feature on and off
using the remote control. Pressing the button that
locks the system selects the options in increasing
order. Pressing the button that unlocks the system se-
lects the options in descending order. Pressing the
remote start button, resets the feature to the factory
default.
Release. Valet/program switch.5.
Note:
Some features have more than two possible settings. Pressing or
will toggle through the two-honk and higher settings.
Once a feature is programmed:
Other features can be programmed within the same menu•
Another menu can be selected•
The learn routine can be exited if programming is complete•
To Next Page
Loading...
Need help?
General
