34
© 2019 Directed. All rights reserved.
Door input does not respond with the progressive trigger, but with
immediate full alarm.
• What zone does the LED indicate? If the LED indicates that the
impact sensor caused the trigger, the sensor may be detecting the
door opening. Reducing the sensitivity or relocating the sensor can
often solve this problem.
• If the LED indicates that the door caused the trigger, you may have
programmed the progressive door trigger OFF. (See Feature 2-4 in
the "Feature Descriptions" on page 19 of this guide.)
The Control Center button doesn’t work or LED doesn't work.
• Make the connector is securely plugged in to the alarm module
and Control Center.
To Next Page
Loading...