Directed 3305 - Wiring Connections; Main (Primary) Harness, White 12-Pin Connector; Door Lock Harness, 3-Pin Connector

To Next Page

To Previous Page

Wiring Connections

Main (Primary) Harness, White 12-pin connector

1 ORANGE (-) 500mA GWA (Ground When Armed) OUTPUT

2 WHITE (+/-) SELECTABLE PARKING LIGHT OUTPUT

3 WHITE/BLUE (-) 200mA CHANNEL 3 PROGRAMMABLE OUTPUT

4 BLACK/WHITE (-) 200mA DOMELIGHT SUPERVISION OUTPUT

5 GREEN (-) DOOR TRIGGER INPUT, ZONE 3

6 BLUE (-) INSTANT TRIGGER INPUT, ZONE 1

7 VIOLET (+) DOOR TRIGGER INPUT, ZONE 3

8 BLACK (-) CHASSIS GROUND INPUT

9 YELLOW (+) SWITCHED IGNITION INPUT, ZONE 5

10 BROWN (+) SIREN OUTPUT

11 RED (+) CONSTANT POWER INPUT

12 RED/WHITE (-) 200mA CHANNEL 2 OUTPUT

Important: NEVER connect 200mA/500mA low current outputs directly to a

motor or high current device WITHOUT a relay.

Door Lock Harness, 3-pin connector

1 LIGHT BLUE 200 mA (-) UNLOCK, 200 mA (+) LOCK OUTPUT

2 EMPTY NOT USED

3 GREEN 200 mA (-) LOCK, 200 mA (+) UNLOCK OUTPUT

Important: Never use this wire to drive anything but a relay or a low-current

input! The transistorized output can only supply 200 mA of current. Con-

necting directly to a solenoid, motor, or other high-current device will cause

it to fail.