EasyManua.ls Logo

Directed 933.TL16 - User Manual

Directed 933.TL16
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DS3+ / DS4+
933.TL16
v1.03.198.9
2019 Toyota RAV4

Questions and Answers

  • M
    Maria HowardSep 12, 2025
    What to do if my Directed Remote Starter shows that ISO 1 is not detected?
    • A
      andrewsinghSep 12, 2025
      The Yellow/Black wire didn't detect the expected signal. Check the connections.
  • K
    kyle91Sep 8, 2025
    Why speed was detected on Directed Control Unit?
    • R
      rwoodSep 8, 2025
      The vehicle was detected as moving, which prevents the system from shutting it down.
  • R
    robinsonalyssaSep 22, 2025
    Why is the CAN bus incorrectly detected in my Directed Remote Starter?
    • A
      Abigail CookSep 22, 2025
      Verify the CAN1 and CAN2 connections.
  • E
    elizabethwattsAug 29, 2025
    What to do if Directed 933.TL16 Automobile Accessories ISO 1 not detected?
    • K
      Katrina WoodsAug 29, 2025
      If the Yellow/Black wire did not detect the expected signal, refer to “Installation (wiring diagrams & vehicle wiring reference charts)” to check the connections.
  • F
    fergusonpatriciaAug 28, 2025
    What does it mean if Directed 933.TL16 Automobile Accessories PTS shutdown error?
    • A
      amandahayesAug 29, 2025
      The PTS output from the module was not activated due to safety protection.
  • E
    Elizabeth WeaverAug 28, 2025
    Why is Directed 933.TL16 showing 'Speed was detected'?
    • K
      Katherine Swanson MDAug 28, 2025
      The vehicle was detected as moving, which prevents the system from shutting it down.
  • V
    Victor HarrisAug 28, 2025
    What to do if Directed 933.TL16 transponder functions were skipped?
    • J
      jennifer90Aug 28, 2025
      If compatible and when RXT mode is not desired or convenience features are needed, reset and reprogram the module.
  • V
    Vanessa WyattSep 8, 2025
    Why brake was not detected on Directed Control Unit?
    • B
      Brandon WashingtonSep 8, 2025
      The brakes were not detected, which prevents the system from shutting down the vehicle.
  • D
    Dr. David Hall MDSep 12, 2025
    What to do if my Directed Remote Starter shows CAN2 not detected?
    • M
      Misty RoseSep 12, 2025
      If your Directed Remote Starter displays a 'CAN2 not detected' message, check the connections of the CAN2 Orange/Green and Orange/Brown wires. Wake up the data bus by turning the ignition on and try again. If the installation doesn't require this connection, skip this step by pressing the programming button 5 times.
  • H
    haydenporterSep 23, 2025
    What does it mean if Directed 933.TL16 Automobile Accessories runsafe was not disabled?
    • A
      Angela MooreSep 23, 2025
      No UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.

Directed 933.TL16 Specifications

General IconGeneral
BrandDirected
Model933.TL16
CategoryAutomobile Accessories
LanguageEnglish

Related product manuals