CHAPTER 3: Installation
Use the DirectOut Release Map to match your DirectOut device with the latest
firmware or software release.
Link: http://www.directout.eu/upload/dokumente/dotec_release_map.pdf
Keep any packaging in order to protect the device should it need to be dispatched
for service.
8. Optional: Connect a USB cable to the USB port for use of the virtual com
port. This requires the USB Serial driver (Windows) being installed first. The
driver is available from the product page at www.directout.eu.
NOTE!
For help with the USB driver installation see „Appendix F - USB Serial Driver
Installation“ on page 36.
TIP!
TIP!
To Next Page
Loading...