User Manual –Wireless Video Bridge Gen 2
Version 1.0.0 12/16/2016 Page 21
FIGURE 8: GENIE "ADD A CLIENT" SCREEN
2) Approximately ~30 seconds after entering the “Add a Client” screen at the
Genie Server, the WVB will have a flashing LED that alternates between
GREEN and BLUE. This indicates that the system is in the proper state to
add a wireless client (C61W).
3) If not already powered on, power ON one of the wireless clients (C41W,
C61Ws)
4) On the wireless client (C41W, C61W), select the “Connect Now”/”Continue”
button while in the “Connecting to Video Bridge” screen to begin client
connection and registration.
FIGURE 9: C41W "CONNECTING TO VIDEO BRIDGE" SCREEN
5) “Attempting to connect to video bridge…” will be displayed.
To Next Page
Loading...
