Chapter 10
80
Tips
2 Select Preferences, and then Updates.
3 Highlight the number of hours of inactivity before the receiver waits before turning off.
4 Select Done.
Note: Select Defaults to reset the changes you’ve made to this feature.
TIPS
• To take full advantage of Dolby Digital 5.1 surround sound, you need an optical cable
and a stereo that supports this feature.
• To use the Caller ID feature on this receiver, be sure to have the receiver connected to
an active phone line and subscribe to Caller ID service from your phone company.
QUESTIONS
• How can I see who has called me in the past? Open your Caller ID History by
pressing MENU, select System Setup and then Caller ID History.
• Why is my audio in another language? You may have selected an alternate
language.
• How can I change the channel order in the Program Guide? You can switch from
Lower to Higher (lowest to highest) or Higher or Lower (highest to lowest) by pressing
MENU-8-5 and selecting the Channel Order Setup.
To Next Page
Loading...
