Page 36
Chapter 3
Using the System
SETTING UP AN AUTOMATIC EVENT TIMER
1. Select a future program using the Browse Banner, Themes Menu, or the
Program Guide.
2. Select a Timer Type option.
3. Select a
Timer Frequency option. Notice that a check mark displays in
the box.
4. Select the Create option to save the event timer.
5. The receiver displays a timer symbol in the Program Guide, and also
when you press the INFO button to get information about the program.
SETTING UP A MANUAL EVENT TIMER
1. Press the MENU button.
2. Select the
Timers option.
3. Select the
Create option. The receiver displays the Create a
Manual Event Timer menu.
4. Select a
Timer Type option.
5. Select a
Timer Frequency option.
Tip: You may start
any timer one
minute early. But if
you set back-to-
back event timers
and the second one
starts early, the first
one will end early.
An event timer
cannot start early
for a pay-per-view
program. If you try
to set a timer for
overlapping events,
you will get an error
message.
Tip: Use the
Program Guide or
your printed
television guide
to see when the
program(s) starts
and stops before
you go to the Set
Date/TIme for
Manual Timer
menu.
To Next Page
Loading...
