Page 34
Chapter 3
Using the System
Note: You can use the number pad buttons to enter the channel number,
or select the Page Up or Page Down option to move quickly through the
list.
6. Press the Select button to add the highlighted channel to the Favorite
Lists. A check mark appears next to the channel.
7. Repeat steps 5 and 6 until you have added all the channels that you
want.
8. To delete a channel from the Favorite Lists, select the channel in the
list. The check mark next to the channel disappears.
9. Select the Save option to save all changes to the Favorite List.
CHANGING THE NAME OF A FAVORITE LIST
1. Press the Menu button.
2. Select the Favorites option.
3. Select the Favorite List that you want to change.
4. Select the Edit List Name option.
Note: You cannot change the name of the All Chan, Adult Chan or
All Sub list.
5. Select a letter in the keypad area on the menu. Repeat to spell out the
desired name. You can enter up to eight characters, including spaces.
If needed, select the
space option to insert a space in the name or the
<back option to correct a letter.
Note: A list must have at least one character. Two lists cannot have
the same name.
Note: At any time, you can select the Clear option to clear the name.
6. Select the Save option to save all changes.
USING TIMERS
Event timers allow you to set up the receiver to tune in and/or record a
future “event,” that is, a program. You can set an automatic event timer for
a program listed with start and stop times in the Program Guide. A
manual event timer allows you to set custom start and stop times for a
timer.
Tip: You can use
an Auto-Tune
event timer to
remind you that a
program is about
to start and then
automatically
tune the receiver
to the right
channel.
To Next Page
Loading...